Connecting Your Device
Android phones can vary based on manufacturer and carrier. Below is a guide featuring screenshots from a Samsung phone on AT&T, but the guide should be helpful for other Android devices as well.
1.Go to the main menu. Choose "Settings" menu. Navigate to Connections
2. Select PAWS-Secure
3. Enter credentials into the phone.
- EAP method should be PEAP
- Phase 2 authentication should be MSCHAPV2
- CA Certificate needs to be unspecified
- Identity should be your MyID
- Anonymous identity should be blank
- The password is your myid password.
Troubleshooting your Device
If you experience issues connecting your device to the PAWS-Secure wireless network, follow the steps below.
Note: If the steps below do not work, it is possible your device has been blocked from the network. Please contact the Help Desk at 706-542-3106 or email us at sts@uga.edu and be ready to provide the wireless MAC address of the device.
Forget PAWS-Secure
Go to settings. Navigate to Connections/Network and Internet, and select WiFi
Select PAWS-Secure
Select Forget
Network Settings Reset
Go to settings
Navigate to General Management
Navigate to Reset
Select Reset Network Settings
Select Reset Settings