Skip to end of metadata
Go to start of metadata

Connecting Your Device


Android phones can vary based on manufacturer and carrier. Below is a guide featuring screenshots from a Samsung phone on AT&T, but the guide should be helpful for other Android devices as well.

1.Go to the main menu. Choose "Settings" menu. Navigate to Connections

2. Select PAWS-Secure

3. Enter credentials into the phone.

  • EAP method should be PEAP
  • Phase 2 authentication should be MSCHAPV2
  • CA Certificate needs to be unspecified
  • Identity should be your MyID
  • Anonymous identity should be blank
  • The password is your myid password.


Troubleshooting your Device


If you experience issues connecting your device to the PAWS-Secure wireless network, follow the steps below. 

Note: If the steps below do not work, it is possible your device has been blocked from the network.  Please contact the Help Desk at 706-542-3106 or email us at sts@uga.edu and be ready to provide the wireless MAC address of the device. 

Forget PAWS-Secure

Go to settings. Navigate to Connections/Network and Internet, and select WiFi


Select PAWS-Secure


Select Forget


Network Settings Reset

  1. Go to settings

  2. Navigate to General Management

  3. Navigate to Reset

  4. Select Reset Network Settings

  5. Select Reset Settings


  • No labels